Stonewalling or stone cladding creates a pleasing aesthetic with an unmatched style. Whether you apply it indoor or outdoors, it effortlessly transforms the ambiance. But its appearance is not the only measure of the walling success. It is the stone quality and the installation process that counts. Now, we will share some tips to install and maintain stone wall cladding.
7 Tips to Install Stone Wall Cladding by Stone Depot
If you want to install stone wall cladding, make sure that you pay attention to the following tips.
1. Measurement
First, you have to measure the area & the number of stones needed. For flat surface stones, you just need to multiply the width & height of the area & deduct openings like windows or doors.
2. Solid Foundation
For stone wall cladding, the best foundation is concrete or brick. If you consider a concrete foundation, just leave it for 6 weeks. For there’s an existing structure, make sure that you clean, level, and reinforce it first.
3. Prepare the Surface
A rough or uneven surface will not let the stone clads stay in place well. So, you have to scratch-coat the surface to make it even. Besides that, the surface cannot have any contaminating materials such as debris, wax oil, and paint.
4. Prepare the Layout
Before installing, you must prepare a layout first. It aids in better arrangement basis size, color variation, texture, and blending different pieces as you want.
5. Quality Adhesive
Since the longevity of stone walling depends on the adhesive quality, using most quality adhesives belongs to some tips to install and maintain stone wall cladding.
6. Grouting
After the stone cladding is installed, you should fill the gaps between the stones with grout or mortar to seal & tighten the area around the stones.
7. Finish
Finally, you need to seal it to ensure a long life to your stone wall cladding, especially for wet outdoors or bathrooms.
3 Easy Tips for Maintenance Stone Wall Cladding for a Good Condition
Then, it is important to keep your stone wall cladding in its top condition. To keep it clean, you can follow these tips and guidelines.
1. Vacuum
Dust is one of the most common issues when it comes to walls, especially for those who live near the highway. Even though you can dust it with a cloth or broom, it is better to use a vacuum cleaner.
2. Trisodium Phosphate (TSP)
This is an inorganic compound you can use as a cleaning agent, degreaser, and stain remover. You just need to mix a half cup of TSP in a bucket of warm water. Then, use it with a soft bristle brush for cleaning your stone wall cladding.
3. Water
There’s no better way to clean walls than with clear water. For exterior walls, just let them air dry. For interior walls, you can dry them with a clean towel.
That’s all some tips to install and maintain stone wall cladding [link to product page]. If you want, you can also make a homemade solution for cleaning your wall. For example, you can make salt & washing liquid.
Want to know more about Tips to Install and Maintenance Stone Wall Cladding from Stone Depot? Please click the WhatsApp link below to contact us directly: https://wa.me/6281578575809 (Aldi) or email us at: info@dw-corporation.com and we will kindly respond to you as soon as possible.
