We have a wide range of wall cladding options using natural stones. But if you ask which one’s works best for the interior, it’s the Bali Limestone wall cladding. This natural stone has an amazing color that will fit with any lighting fixtures. In addition to color, Bali Limestone cladding offers a variety of patterns. You can choose the pattern according to your taste, and if you ask for the interior, we suggest the Diamond Cut that will show elegance and exoticism. Other than that, the Linear Cut is awesome for minimalist-style housing.
The Bali Limestone wall cladding also has characteristics that lure homeowners to choose it. Also, they admire the durability and strength that ensure longevity. And it doesn’t matter the reasons that put you into this amazing stone, you need an expert to install this stone on your interior. But, if you think you can handle it, you can follow these steps to assist your projects.
1. Know Your Needs
Before we start talking about the installation process, it’d be better to refine your order. Expert suggests purchasing 10% or more stone slabs than actually required. The surplus will cover the damage or any cuts that occur during installation since you’re not an expert at this project. Knowing the number of stones you need also helps you to finish the project on time.
2. The Surface
Next, it would be better to check if the surface is clean and clear. You have to ensure that the surface has no leak or damage. Or else, you have to rebuild the wall to shape a solid foundation. There are several things you can do about the surface; the easiest thing is scratching the paint, dust, or dirt off your wall.
3. Installation Method
As beginners, you need to know a few installation methods for cladding. The technique called Mechanical Bonding used for the exterior so we’re not going to talk about it. You can also use Aluminum Backing which requires an aluminum frame to support the installation. Of course, it’s costs higher as you need structural support. The easiest way is Direct-Adhered where you use the cement or glue to stick the stone into your wall. But what we suggest is Spot Bonding, a similar technique to Direct-Adhered, only this time you need strong epoxies. This method lets the gaps where the water and air movement can flow naturally. Either way, whatever methods you try, make sure you do it right.
When all the stones are applied to the wall, the finishing work will evaluate the excessive adhesive or inspect any damage on the surface of the stone. This step helps you to decide whether or not to take off any imperfect stone before it’s too late.
5. Pre-Installation Treatment
Don’t forget this part even though you have done with the projects. Since it is an interior project, you don’t need any tent or shade to protect it from the weather. Small inspection such as cleaning the surface is enough to ensure your project free of dust.
Here’s the video of how to install Bali Limestone Wall Cladding from the expert for your reference.
When it comes to wall cladding, we have to choose the right material to beautify the wall. Most people use ceramics or just paint the wall. But for something tremendous, we can drop our choice to natural stone. There are plenty of natural stones that are perfect for the wall cladding. In this project, we suggest using Bali Limestone Wall Cladding that offers unique characteristics. For those who don’t know, Bali Limestone is the most beautiful natural stone that fit for both interior and exterior parts. It’s famous for its unique tone and texture.
It’s not surprising that homeowners prefer Bali Limestone wall cladding instead of others. The wide range of patterns from Diamond Cut, Tumbled, Hexagonal, or even Linear Cut will transform your wall into a work of art. Now, it’s all about the installation process that takes time and effort. Here, we’ll give you instructions to install Bali Limestone for wall cladding.
Bali Limestone Wall Cladding Installation Guide
1. Solid Foundation
The first thing you should prepare for this project is a solid foundation. The foundation will ensure the wall has great support for the natural stone to attach. There’s plenty of option for the solid foundation, you can use brick, concrete, or blockwork as the material. Keep in mind that the wall is the main construction. Meanwhile, the stone slab is merely decoration. If you use a new build wall, let it sit for at least a month before start the installation.
2. Evaluate the Surface
When you use the existing wall, all you need to do is just making sure the surface is clean. It doesn’t matter what kind of material used to build the wall; it should be free from any contaminating materials. Clean it thoroughly and inspect small things that can prevent the slab from attaching tightly. Remove the paint, oils, and any debris from the surface.
3. Plan the Mixing
There are plenty of patterns you can make with the Bali Limestone wall cladding. And you need the right plan to mix and match the stone to shape the correct pattern. It’s also okay to make some marks on the stone with a removable pen. This step will give you a preview of the end result of this construction project. If you start to attach the stone without a certain plan, you might regret the steps you took. Planning helps you to calculate everything, including whether or not you need more stone slabs than you have imagined. Once you have a fixed plan, you can start to attach the stone cladding.
4. Protect the Project
When you have finished with the installation, it’s time to do a small inspection of your work. Clean the leftover debris and make sure the surface is not scattered. You can even seal the surface of the Limestone to make sure the rain or heat won’t affect the wall. Just like a new baby, your project needs protection for at least 2 weeks. You can even build a shade to make sure the project will adhere optimally.
Here’s the video of how to install Bali Limestone Wall Cladding from the expert for your reference.
Installing Bali limestone cladding yourself gives you more freedom to decorate the property. Here is how to do it.
Indonesia Classic White Limestone
Limestone is a popular material for a wall cladding. Bali limestone cladding comes in various textures and shades, suitable for various construction projects. They come in textured and smooth surfaces, with colors like light grey, dark grey, off-white, green, and pastel gold. Stone cladding pieces add a raw, textured beauty to your property. Cladding is popular for the exterior, such as the wall fences and vertical garden, but you can have it inside the building (such as for an ornamental wall). You can save money by installing the cladding pieces yourself. Using common construction tools and safety equipment, you can install stone cladding pieces easily.
How to Install Bali Limestone Cladding – Prepare Yourself For The Guide Expert Installation
Tools & Material required
Installing Bali limestone cladding as an exterior requires proper surface preparation and protection. Moisture and heat may seep in and damage the structural integrity and the base surface. Prepare your cladding pieces, mortar mixture, metal lath, battens, water-resistive barrier (WRB) mixture, and galvanized fasteners. For the standard tools, prepare a hand grinder, mortar mixing machine, trowel, hammer, wheelbarrow, brush, metal sticks, wide-mouth nippers, tuck pointer, and strings (to keep the cladding pieces in straight lines). Wear proper safety equipment such as goggles, gloves, masks, hard hats, and work boots with metal tips. You must also prepare a tent or tarp sheet to protect the fresh cladding from rain.
Layering with Adhesive
First, prepare the surface for the Bali limestone cladding. Coat the base with the WRB and install the metal lath as the base layer. Once dry, continue by applying battens to create rough surfaces that will stick the mortar to the base layer. Make your mortar mixture after the base layer is ready (the rough calculation is one bag of mortar mixture for every square meter of one cladding stone). You should measure the size of the area you want to cover with stones before applying any materials. It is better to have a few excessive limestone cladding pieces when you are done.
Place your limestone pieces in straight lines using mortar. Fill in the grouts to keep small particles from seeping in. You can cut some stone pieces to cover the edges and corners. You can order special stones to cover these awkward parts from your stone supplier. Use a tuck pointer to create cleaner edges. Protect your freshly installed limestone cladding with the tarp or tent for three to four days after installation (you can install the tent beforehand to protect your work while you are working). Order the products from Stone Depot, an Indonesia-based natural stone supplier that sells the best Bali limestone cladding pieces. Get your dream limestone cladding construction with Stone Depot for the best result.
Bali Green Sukabumi stone is a great material for pool tiles and wall claddings. Install them by following this expert guide.
Green Sukabumi Stone – Photos courtesy of Renaissance Pattaya Resort, Thailand
Indonesia’s natural stone makes great materials for wall cladding, including the Bali green Sukabumi stone. Builders and designers around the world consider it a “premium” stone, thanks to its unique color and rarity. The green stone is a popular material for swimming pools at villas, luxury houses, holiday properties, and spas. It often turns up as tiles, both sleek and textured. However, this green stone is also great as a stone cladding. The subtle green shade and textured surface create a unique look in your property. Sukabumi stone products are easy to install. You can use expert DIY guides to install Sukabumi stone cladding or tiles.
How to Install Green Sukabumi Stone – Prepare Yourself for The Guide Expert Installation
Make sure subtrates is flat & clean – Step 01 Install Green Sukabumi
Make sure your surface is flat and flawless before installing the Bali green Sukabumi stone. It must be free from bumps, holes, cracks, and chemical substances like paint or wax. Since the stone is often installed as exteriors (or in pools), you must prepare a strong adhesive mix to keep the stone from peeling off and damaged. One of the best recommendations for home projects is Mapei Granirapid Grey, a two-part mortar mixture for installing stones on drywalls or swimming pool surfaces. You must also prepare tools like a circular saw, trowel, grout sponge, and safety equipment. Make sure the stone pieces have the right sizes for the project.
Prepare the elevation with the strings, and mixing the adhesive
Start making your Bali green Sukabumi stone adhesive by mixing 25kg of the silica sand part with around 5.5kg of latex (follow the instructions and volume guide). You can use a mechanical stirrer to save time and get a smoother mixture. Apply the adhesive mixture by making the first thin layer on the flat surface, before adding the proper thickness. Make sure to install your Sukabumi stone pieces in less than 20 minutes after applying the adhesive. However, if you work in a hot, windy, or dusty weather, work faster to avoid the adhesive from drying and damage. Anticipate an extreme weather condition by erecting a tent over your work area.
Stone Depot Private Installer for Swimming Pool Project in Camaya Coast, Philippines (Courtesy of Camaya Coast, Philippines)
If you work in a spacious area, use strings to create straight lines. Once you attach all the stone pieces, keep them from getting exposed to rain, water, and mud for three to four days. You must also protect the stones from sun exposure for 12 hours right after the installation of the last piece. Protect your work using a large tent or tarp layer. You will get a more durable result if you use high-quality stones from Stone Depot, an Indonesia natural stone supplier that has supported projects in 50 countries. Follow this guide and get the best green Sukabumi stone installation result.
3 Easy Steps to Install the Stone Wall Cladding in Your House!
Installing stone wall cladding is not as difficult as it seems. By using these 3 easy steps, your house will look prettier in no time!
As you know, a plain brick wall is not providing any sense of attractiveness in your house, especially if your home interior is not using the industrial or classic built concept as the main theme. To spruce up the wall, you should use natural stones as the wall cladding because of some reasons. First, it can provide better thermal insulation and better resistance to extreme weather conditions, and second, it will significantly boost the artistic value of your house. To help you actualize it, here are the 3 easy steps on how to install stone wall cladding in your house:
Step 1: Measuring and Cleaning
Measuring and cleaning is the first step on how to install stone wall cladding. Measuring the exact lengths and widths of your wall is vital to ensure that you have the necessary material for the cladding. Do not forget to include other important elements to your measurement such as ventilation covers, door frames, or windows. It is important to note that the measurement must be made as accurate as possible. Do not try to make a baseless prediction since it will cause uncertainty. If the measurement has been made, you have to clean your wall thoroughly. Make sure that no dust, debris, or dirt on these areas.
Step 2: Layering and Mixing
Layering and mixing is the second step on how to install stone wall cladding. Before you start layering the first row of the wall, you have to make sure that the ground surface is leveled. Try to let the first layer of your cladding dry before continuing. The dry layer will give you a little glimpse of the end result. If you like it, you can start adding another layer, while if it does not suit your style, you can change it right away. When you have made the necessary modification, you can start mixing the stone wall cladding with the adhesive. Make sure that you use the appropriate amount of adhesive to optimize the end result.
Step 3: Attaching and Cutting
The final step on how to install stone wall cladding is attaching and cutting. After mixing the stone wall and the adhesive, now you can start applying the mixture to the stacked stone panel then attach it firmly onto the wall. Be generous with the adhesive so it will stick better to the wall. The lack of adhesive can cause the stone to fall off thus creating an unnecessary problem for you. Lastly, you just need to cut the stacked stone using a special natural stone grinder (it usually equipped with a diamond stone blade). You can cut the stones to your desired size. Be careful while cutting the stones since the grinder can cause serious injury. Wear some protection tools for your own safety.